MyPcFun:)

Friends today i write a post on flashing or installing firmware Samsung Corby pop. (GT-C3510) Also called Genoa in Europe.

• You will need a USB cable.
• Make sure you charge your phone to maximum battery level.
• Make sure there is no power failure and never plug out the data cable when the upgrade is going on.

Here are the steps of upgrading the software.

1) Install Samsung New Pc Studio or just istall usb drivers for Samsung corby GT-C3510

2) Download C3510_Flash loader 7.0.4_SGH_05_v1.4
    Here is the link. http://www.4shared.com/file/SmRHkLRk/C3510_Flasher.html

3) Download the firmware files for C3510. Here's the one's I used.
    Link: http://www.fileserve.com/file/aMu8yF4/C3510DXIL7_OLA.rar

4)Extract contents of the C3510 Flasher RAR to a folder on the desktop. Also extract the firmware files into a folder on the desktop.

5)Then run the file named "C3510_Flash loader 7.0.4_SGH_05_v1.4

6)Click on "Select Model" and browse to the folder C3510 flasher which you extracted to the desktop. Select the file C3510_GENOA_Setting_v02.mdl and click open.

• Select with CSC
• Select BIN+STL/BIN+TFS.
• In Application binary file, select browse and browse to the folder named C3510DXIL7_OLA which you extracted to the desktop. Select the file C3510DXIL7.cla and click open
• In Application TFS file, select browse and browse to the folder named C3510DXIL7_OLA which you extracted to the desktop. Select the file C3510DXIL7.tfs and click open
• In Application CSC file click browse and browse to the folder named C3510DXIL7_OLA which you extracted to the desktop. Select the file C3510OLAIL7.csc and click open.
• Scroll down to the bottom and you will find "number of devices" Make that value to "1" if its not.
• If your phone is connected, remove it and switch it off. Dont connect it yet.
• Press Start on the C3510 flasher.
• Press and hold the volume down button and camera button of your phone together. Then connect the cable. Leave the buttons only after you hear the "new device connected" sound of windows.
• Wait for a while, as it proceeds through the steps.
• After about 10 minutes or so, if the software shows "Freeing slot to connect other device" You're done.
• Unplug your phone. Remove the battery and wait for about 10 seconds. Then put it back in.
• Switch it on and enter *2767*3855#. Wait till it completes. This is a hard reset, done so that it works without any errors.

• Done! Enjoy using your flashed phone! :D

Here’s the trick for finding your IP (internet protocol) address of a website

•First you click Start
•Then click Run.
•Then in the run dialog box, type cmd
•A black box should come up.
•In that type ping website address

You can add "Copy to Folder" and "Move to Folder" to the Explorer context menu, so when you right-click a file or folder in Explorer, you have the option to Copy or Move it to another folder.

1.Start the Registry Editor
2.Go to HKEY_LOCAL_MACHINE\SOFTWARE\Classes\ AllFilesystemObjects \ shellex \ContextMenuHandlers \
3.Right-click the ContextMenuHandlers entry, and from the menu select New > Key
4.Name the new key Copy to Folder
5.Change the (Default) string value found in the Copy to Folder key to
{C2FBB630-2971-11D1-A18C-00C04FD75D13}
6.Then again Right-click the ContextMenuHandlers entry, and from the menu select New > Key
7.Name the new key Move to Folder
8.Change the (Default) string value found in the Move to Folder key to
{C2FBB631-2971-11D1-A18C-00C04FD75D13}
9.Close the registry editor

Micro Emulator is a excellent free software which enable you to run your favorite Java Application or Games in your laptop or PC. Its very easy to use and full support of your mouse. You just control all application with your mouse easily.To run it first download and install java runtime enviroment JRE.

Requirements :
Micro Emulator 2.0.4 :Download

Disable CD/DVD/USB Autorun

1) Click Start, Run and enter GPEDIT.MSC
2) Go to Computer Configuration, Administrative Templates, System.
3) Locate the entry for Turn off autoplay.
4) Double click on it and on the setting tab.
5) Now turn off autoplay on All drives and click enable.
Click Apply and OK