Flashing or installing firmware on Samsung GT-C3510 (Corby Pop) (Genoa)

Posted by love malhi
Friends today i write a post on flashing or installing firmware Samsung Corby pop. (GT-C3510) Also called Genoa in Europe.

• You will need a USB cable.
• Make sure you charge your phone to maximum battery level.
• Make sure there is no power failure and never plug out the data cable when the upgrade is going on.

Here are the steps of upgrading the software.

1) Install Samsung New Pc Studio or just istall usb drivers for Samsung corby GT-C3510

2) Download C3510_Flash loader 7.0.4_SGH_05_v1.4
    Here is the link. http://www.4shared.com/file/SmRHkLRk/C3510_Flasher.html

3) Download the firmware files for C3510. Here's the one's I used.
    Link: http://www.fileserve.com/file/aMu8yF4/C3510DXIL7_OLA.rar

4)Extract contents of the C3510 Flasher RAR to a folder on the desktop. Also extract the firmware files into a folder on the desktop.

5)Then run the file named "C3510_Flash loader 7.0.4_SGH_05_v1.4

6)Click on "Select Model" and browse to the folder C3510 flasher which you extracted to the desktop. Select the file C3510_GENOA_Setting_v02.mdl and click open.

• Select with CSC
• Select BIN+STL/BIN+TFS.
• In Application binary file, select browse and browse to the folder named C3510DXIL7_OLA which you extracted to the desktop. Select the file C3510DXIL7.cla and click open
• In Application TFS file, select browse and browse to the folder named C3510DXIL7_OLA which you extracted to the desktop. Select the file C3510DXIL7.tfs and click open
• In Application CSC file click browse and browse to the folder named C3510DXIL7_OLA which you extracted to the desktop. Select the file C3510OLAIL7.csc and click open.
• Scroll down to the bottom and you will find "number of devices" Make that value to "1" if its not.
• If your phone is connected, remove it and switch it off. Dont connect it yet.
• Press Start on the C3510 flasher.
• Press and hold the volume down button and camera button of your phone together. Then connect the cable. Leave the buttons only after you hear the "new device connected" sound of windows.
• Wait for a while, as it proceeds through the steps.
• After about 10 minutes or so, if the software shows "Freeing slot to connect other device" You're done.
• Unplug your phone. Remove the battery and wait for about 10 seconds. Then put it back in.
• Switch it on and enter *2767*3855#. Wait till it completes. This is a hard reset, done so that it works without any errors.

• Done! Enjoy using your flashed phone! :D
Labels:
  1. Anonymous

    my phone welcome screen is just flashing
    phone is not started
    wat should i do????

  2. i think this is due to your currupted firmware AND which phone you use tell me

  3. Anonymous

    http://www.fileserve.com/file/aMu8yF4/C3510DXIL7_OLA.rar link not work

  4. link not working help me to download firmware files

  5. what is different previous situation?
    have you got any photos and link dead

  6. Go to tsar3000.com to download samsung flash files

  7. Anonymous

    is there anything new in this firmware?

  8. Yes...i install c3510 vivo firmware, this gives me youtube streaming function from inbuild browser and new start screen

  9. Anonymous

    Can i get the full URL for that site?

  10. Anonymous

    hey here to get the c3510 vivo firmware...can i get the direct link?...

  11. Anonymous

    Muchas gracias, me funcionó full, lástima el operador "VIVO" pero por fin pude ponerlo en español. Gracias...

Post a Comment